Our Saw-tooth Wave Ladder Jig is a brand-new type of energy saving and high efficient gravity separation equipment and established based on the traditional Sine Wave Jig. The difference in between Saw-tooth Wave Ladder Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow.

Bed layer rises integrally and gradually dropped with a long efficient loose time, allowing considerable boost of dealing with capacity for unit screen surface area, decline of lower limit of grain size recovery and large save of makeup water for undersize fraction.

At CommodasUltrasort, we pride ourselves on producing simple to use and easy to install systems. Furthermore, they are low upkeep and a modem connection secures online system evaluation and software application downloads. CommodasUltrasort's systems Mean Time In between Failures (MTBF) stands at 7 thousand hours. This means ISO 9001 that our products will guarantee your operation runs both highly efficiently and extremely effectively.

The Sulfuric Acid, Rock phosphate Mineral Powder and water are mixed in an agitated process vessel connected with scrubber system. The above slurry option is filtered and the filterate is Collected in another agitated procedure vessel as Unrefined Phosphoric Acid for additional processing. The solid part is Gypsum, which is completely washed with water to make it free from Crude Phosphoric Acid. The wash water \ recycled water containing phosphoric Acid is recycled in next batch with Rock phosphate and Sulphuric Acid. Throughout this action the pollutants of Rock Phosphate Mineral [such as Florspar CaF2, CaCo3 Lime stone] are reacted with Sulphuric Acid.

The CaF2 forms HF with sulphuric Acid. The HF is reacted with Silica to types SiF4 is extremely soluble in water to form H2SiF6 and silica inside the Scrubber in addition to inside the agitated Process vessel.

This Acid is concentrated and the concern condensate in neutralised with Ca(OH)2 & insoluble precipitate is mixed with hyproduct Gypsum. The Crude Phosphoruc Acid contains further some H2SiF6 The H2SiF6 [Hydro Silicic acid or Hexa Fluoro Silicaste] is combined with Lime stone Powder to form insoluble Florspar (CaF2), which is soluble only in strong concentrate acid. This is also filtered with partial precipitate of Calcium Phosphate (Tri) this insoluble is recycled with Acid healing of P2O5 in Adulation procedure with Rock Phosphate.

After filtering above Slurry Solution, the filterate is Purified Phosphoric Acid.

Ultrafine mill is improved through the use of high pressure spring and the accuracy of devices, thereby increasing the fineness of grinding products, the tiniest boost from the initial 2000 target for the 3500 tasks. Under the exact same degree of fineness than the average yield of 31.8% increased airflow mill, powder producer considering that 2006, just like it, end up being the very first choice for purchasing the mill!

High Pushing Suspension Mill is generally used to calcite, limestone, marble, kaolin, clay, coal, triggered carbon and other materials, grinding and crushing, grinding for the processing of zeolite powder is most proper, and the fineness of 500 mesh (25 microns) -2500 Head (5 microns) between the adjustable, zeolite powder makers might have to change the fineness inning accordance with their own needs.

Practical activity of zeolite powder filler level: product is made by processing, primarily used for plastic, rubber, leather and other markets as a practical filler, instead of light calcium carbonate. Used in plastic items, its strength increased by 20% or more. For the paper market, in the manufacture of newsprint, the place of talcum powder, delegate see a higher degree.

You may also be interested to read